All Dielectric ADSS Fiber Cable Span 100M With PE Jacket
Self-Supporting Aerial Cable
Product Description
ADSS cable is made of non-metallic material and self-supporting
with the aerial power transmission line. The tension resistance
material is aramid yarn with high elasticity modules. And
optimizing structure can deploy the weight of the cable and its
mechanical and physical properties appropriately and minimize the
load on the tower. Loose tube construction, tubes jelly filled,
elements (tubes and filler rods) and water blocking yarn laid up
around non-metallic central strength member,polyester yarns used to
bind the cable core, water blocking tape longitudinally wrapped
around the cable core, thenaramid yarn reinforced and PE outer
sheat.
Characteristics
Optimum cable structure, high fibre density.
Accurate fibre length balance, ensure stable performance.
No gel in cable core for water blocking, low carbon and
environmental friendly.
Structure Innovation in sheath, enhancing the blowing performance.
Proven loose tube design for performance
Small diameter, lightweight and low friction sheath design
Excellent blowing length and fast, safe and cost effective
installation
Drycore design for excellent water blocking performance and easier
handling
SZ stranding design allows for easy mid-span access and isolates
fibers from installation and environmental rigors
Easy installation and removal when necessary
Samples
Application
Suitable for Aerial Laying method
Storage / Operating Temperature: -40℃~+70℃
Optical Characteristics
| Items | Unit | Specification |
| G652D |
| Mode Field Diameter | 1310nm | um | 9.2±0.4 |
| 1550nm | um | 10.4±0.5 |
| Cladding Diameter | um | 124.8±0.7 |
| Cladding Non-Circularity | % | ≤0.7 |
| Core-Cladding Concentricity Error | um | ≤0.5 |
| Coating Diameter | um | 245±5 |
| Coating Non-Circularity | % | ≤6.0 |
| Cladding-Coating Concentricity Error | um | ≤12 |
| Cable Cutoff Wavelength | nm | acc≤1260 |
| Attenuation(max.) | 1310nm | dB/km | ≤0.36 |
| 1550nm | dBkm | ≤0.22 |
Technical Data
Span : 100m |
under 110kv |
48core |
structural parameter |
Central strength components : FRP |
Diameter : 1.5mm |
Loose tube (jelly filled ) |
Outer diameter :1.8mm |
Inner sheath PE |
Thickness : 0.9mm |
outer sheath PE |
Thickness :1.8mm |
Technical parameter |
outer diameter of Cable | 10.0mm |
cable cross-sectional area |
95.03 mm2 |
Fiber model |
G.652D |
Weight of cable |
85kg/km |
Rated tensile strength (RTS) |
10 kn |
Minmum allowed tension(MAT) |
4kn |
EDS |
3.2kn |
Young's modulus |
7.8 kn/mm2 |
Coefficient of thermal expansion |
1.810-6/°C |
Cruss resistance |
Long term :1100 n/100mm |
short term:2200 n/100mm |
Permission bent radius |
Long term (when running) 220 mm |
Short term (when laying) 360 mm |
4-144 core ADSS Fiber Optic Cable
Fiber count | Structure | Fibers per tube | Loose tube diameter (mm) | CSM diameter /pad diameter(mm) | Nominal Thickness of outer jacket(mm) | Cable diameter (mm) | Cable Weight (kg/km) |
| 4 | 1+6 | 4 | 2.0±0.1 | 2.3/2.3 | 1.7 | 10.5±0.5 | 81 |
| 6 | 1+6 | 6 | 2.0±0.1 | 2.3/2.3 | 1.7 | 10.5±0.5 | 81 |
| 8 | 1+6 | 4 | 2.0±0.1 | 2.3/2.3 | 1.7 | 10.5±0.5 | 82 |
| 12 | 1+6 | 6 | 2.0±0.1 | 2.3/2.3 | 1.7 | 10.5±0.5 | 82 |
| 24 | 1+6 | 6 | 2.0±0.1 | 2.3/2.3 | 1.7 | 10.5±0.5 | 83 |
| 36 | 1+6 | 6 | 2.0±0.1 | 2.3/2.3 | 1.7 | 10.5±0.5 | 84 |
| 48 | 1+6 | 12 | 2.2±0.1 | 2.6/2.6 | 1.7 | 11.1±0.5 | 93 |
| 72 | 1+6 | 12 | 2.2±0.1 | 2.6/2.6 | 1.7 | 11.1±0.5 | 95 |
| 96 | 1+8 | 12 | 2.2±0.1 | 3.0/3.9 | 1.7 | 12.5±0.5 | 122 |
| 144 | 1+12 | 12 | 2.2±0.1 | 3.5/6.4 | 1.7 | 15.5±0.5 | 185 |
Package Detail
Export Wooden drum,Normal shipping length of the cable will be 2km
or 3km.
Other length is also available if required by buyer.
Mark:Usually we only attach the test report on the packaging, but
your request is available too.
For example:
A.Company Name
B.Gross/Net Weight
C.Fiber Type
D.Cable Length
FAQ
1.Are you tradning company or manufacturer?
We are the manufacturer with 10 years' experience ,we are
specialized in research,development and production
for fiber optic cable,drop cable and path cord ect. Our factory is
in Guangzhou city,welcome to visit us!
2.About the quality?
We will delivery before tested every fibers when finished
production.
After price confirmation, you can require for free samples to check our quality.
3.Can you accept small order?
Yes, small order is available. We support new project of our
customers, as we know business is always from small order.
4.What is your delivery time?
Usually about 3-7days working days,it mainly depend on order
quantity.
But pls be assured that we will arrange your goods asap after your
payment .
5.Can you accept the OEM service?
Yes, we welcome the OEM service. We can print your logo on the
product. Any idea from you is available.
