What s GYTS Fiber Optic Cable?
GYTS Fiber Optic Cable is the outdoor fiber optic cable type used
for duct and aerial applications.
We supply single mode GYTS fiber optical cable and multimode GYTS
fiber optic cable, fiber strand from 2 cores to 288 cores.
A related GYTA type cable is available.
GYTA Optical Cable And GYTS Fiber Optical Cable For Duct/Aerial
Application
Features:
Good mechanical and temperature performance
High strength loose tube that is hydrolysis resistant
Special tube filling compound ensure a critical protection of fiber
PE sheath enhancing moisture-proof
Small diameter, light weight and friendly installation
Long delivery length and low price.
Application
- Application: Duct / Aerial /Direct buried
- Standard : YD/T 901-2001 and IEC 60794-1
These corrugated steel tape armored cables are suitable for
installation in aerial or duct environment for long haul
communication, LAN
Specification
- The fiber, Φ250µm, are positioned in a loose tube made of a high
modulus plastic
- Tubes are filled with a water-resistant filling compound
- A FRP, locates in the center of core as a non metallic strength
member
- Tubes (and fillers) are stranded around the strength member into a
compact and circular cable core
- The cable core is filled with filling compound to protect it from
water ingress, over which a thin PE inner sheath is applied. After
the PSP is longitudinally applied over the inner sheath. The cable
is completed with a PE outer sheath.
Fiber parameter| Item | Unit | Specification |
| Fiber Type | G.652D |
| Mode field diameter | 1310nm | mm | 9.2±0.4 |
| 1550nm | mm | 10.4±0.8 |
| Cladding diameter | mm | 125.0±1 |
| Cladding non-circularity | % | ≤1.0 |
| Core/cladding concentricity error | mm | ≤0.5 |
| Coating diameter | mm | 245±5 |
| Coating non-Circularity | % | ≤6.0 |
| Coating/cladding concentricity error | mm | ≤12.0 |
| Cable cut-off wavelength | nm | ≤1260 |
| Attenuation Coefficient | 1310nm | dB/km |
≤0.36 |
| 1550nm | dB/km |
≤0.22 |
| Proof stress level | kpsi | ≥100 |
Technical Parameters
| Fiber count | Structure | Fibers per tube | Loose tube diameter (mm) | CSM diameter/pad diameter (mm) | Nominal Thickness of outer jacket (mm) | Cable diameter/ Height (mm) | Cable weight (kg/km) |
| 4 | 1+5 | 4 | 1.8±0.1 | 1.4/1.4 | 1.4 | 9.0±0.3 | 80 |
| 6 | 1+5 | 6 | 1.9±0.1 | 1.4/1.4 | 1.4 | 9.0±0.3 | 80 |
| 8 | 1+5 | 8 | 1.9±0.1 | 1.4/1.4 | 1.4 | 9.0±0.3 | 80 |
| 12 | 1+5 | 6 | 1.9±0.1 | 1.4/1.4 | 1.4 | 9.0±0.3 | 80 |
| 24 | 1+5 | 6 | 1.9±0.1 | 1.4/1.4 | 1.4 | 9.0±0.3 | 85 |
| 36 | 1+6 | 12 | 2.2±0.1 | 1.6/1.6 | 1.6 | 9.7±0.3 | 100 |
| 48 | 1+5 | 12 | 2.2±0.1 | 1.6/1.6 | 1.6 | 9.7±0.3 | 105 |
| 60 | 1+5 | 12 | 2.2±0.1 | 1.6/1.6 | 1.6 | 9.7±0.3 | 110 |
| 72 | 1+6 | 12 | 2.2±0.1 | 2.0/2.0 | 1.6 | 10.6±0.3 | 122 |
| 96 | 1+8 | 12 | 2.2±0.1 | 1.6/3.5 | 1.6 | 12.0±0.3 | 160 |
| 144 | 1+12 | 12 | 2.2±0.1 | 2.0/6.4 | 1.8 | 15.6±0.3 | 240 |
| 216 | 1+6+12 | 12 | 2.2±0.1 | 2.2/2.2 | 1.8 | 16.0±0.3 | 270 |
| 288 | 1+9+15 | 12 | 2.2±0.1 | 2.2/4.3 | 2.0 | 18.2±0.3 | 282 |
What is Differences between GYTS optical cable and GYTA optical
cable?
GYTS cable is universal optical cable; it can be used in aerial,
duct and direct-buried while GYTA can be used in aerial cable and
duct cable not in direct-buried cable.The S in GYTS refers to steel
tape which can sustain large pulling force, the A in GYTA refers to
Aluminum tape which has better anti-rust and moisture resistance
than steel strip, therefore, GYTA cable has longer service life
when used in duct transmission. Choose GYTS cable when tensile
strength is needed.
